MKS SBASE V1.3 32-bit Open Source Smoothieboard 3D nyomtató vezérlőpanel

Description:
Using 32bit 100M Cortex-M3 MCU-LPC 1768, and improve its performance highly
Support highly modular open source firmware Smoothieware, easy for secondary development, eliminating worries can not grasp the core code
Support network function, then proceed remote control via IE Explorer
Using DRV8825 stepper driver which supports 32-microstep and far exceeding the 4988 performance, the use of SOP package, with excellent cooling
Currents of the stepper motor can be set directly, which can avoid the damage

Features:
Using high quality FR-4 4 layers PCB and special design for cooling
Using professional power chip, support 12V-24V DC input
Good to work with 12864LCD and MKS TFT touch screen
Fix temperature problem
Add thermocouple Pins( can’t be used with 12864lcd together)
Create some pins P1.22 P1.23 P2.12 P2.11 P4.28 for developing
Extend endstop power 3.3V / 5V
Preassemble two big heatsinks
Dimensions:145x95x22mm

How to use:
Copy “firmware.bin” and “config” from config file to SD card (SD smaller than 64Gb).Need to change config name .Such as: Change config-mks-xyz into config.txt
Adjust config.txt according to the configuration
Refer to MKS-SBASE PIN , make correction connection. Such as stepper motor ,endstops
Plug the SD card to the board, after power on, it will automatic update
If connect computer with USB, need to install the driver (Refer to below specification )

Install the Driver:
First, you should upload the zip file
Then, plug the USB to computer . Next, enter device manger
Then will turn up COM after install successfully

Download Firmware and Update:
Please upload firmware （https://github.com/makerbase-mks/MKS-SBASE ）
Copy configuration (including firmware.bin and config.txt) to SD card, insert to the board and power on, it will automatic update
After successful updated, the file name will turn into firmware.cur.

Package Controller:
1x MKS-SBASE V1.3 Controller Board
1xUSB Cable